Vinta-Translate

Wednesday, 16 October 2013

Family Album stuff

Old Racing, With Her Eyes Closed Giclee Print


Alberto & Posh.

Crikey old chap.....
I need a flagon of ale to calm mi down after that wild ride !!!!!!!!!!

Sunday, 13 October 2013

The BSA B31 that time forgot. Part 11

Greetings, Crackleport here....
Yep ! No saving the world this weekend.....No sir ! I'm busy !!!!!
I've got me some parts for Lovely Maroon's gearbox so let's get down 'The Old Sidevalve Bar' and start fettling.
The gears and casings had cleaned up a treat a while back but now with new bearings fitted his little antique is soon going to be shifting those cogs like BSA intended (Hum !!!!!)
Take a good look now cause this is the last you'll be seeing of these little fella's for quite some time.

It's beer o'clock
So......
It's goodbye from Posh
and it's goodbye from me.
Quoniam amicus meus iter ad bibendum ex animo lifes divitias iacet per lagenas ceruisie veneficiis.

Thursday, 10 October 2013

Parallel shifter - Same world but different

Keanut here - Hello. I'm beginning to get confused !!!!! Oh no !!!!!! Not Confusion.....with a capital 'C' It's a good job you readers have taken the anti-confusion medicine ...........and are still able to keep finding a way through the digital maze to Vintafake base camp. ....Yes, my dear Vintafaking peeps.... The sands of time are slowly but surely slipping through the hour glass....We must press on with this quest......we must save planet earth.....and all the Viragos that abide within it !!!!! Keep reporting for duty and we will succeed.
Power to the Peeps.......and all those who dare enter The Old Sidevalve Wormhole


But why am I, Keanut Crackleknees confused ?
This tank work is taking it's toll......First I'm working on Lovely Maroons fuel holding vessel and then in a flash I'm rubbing my hands all over the VBobbers curvacious 12"er !
Two balls in the air !  Two tanks at once ! Two creative thought's running loose in one brain !
Phew.......Pushing the limit of multi-tasking for sure.....

Anyways, successfully multi-tasked work done on the VBobber is as follows....
Using offcuts of brass, (which were produced whilst creating the Headlampius Mantodea) I soldered these afore mentioned offcuts to 2 conveniently placed pressings on the underside of the VBobber tank, drilled and tapped them to some old BSP type thread so they could accept threaded adaptors.....which in turn will accept a balance pipe....thus allowing fuel to flow magically between each side...thus ensuring that fuel is always available at the tap.....thus and thrice thus...blah blah....


How good is that ? I now have 2 very large sticking up thingies !!!!!
Pleasing to the eye and hard to the touch....
Posh !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!  Let's beer !!!!!!!!!!!!!!!

Tuesday, 8 October 2013

Greetings....and welcome to The Vintafaker Blogspot. An oasis of real life in the vast desert of Bullsh*t
This is a jotting made of nano powder that exists purely to help the lost souls who spend hours locked within Googles addictive web. Yes, the digital tentacles (or should it be digital testicles) are slowly pulling them neared and nearer to the matrix. Time is running out...WHO WILL SAVE THE WORLD ?
I (Keanu Crackiki-Nagasaki) am working tirelessly to save a small part of the internal combustion engine world for future generations. does that count ? I think so ! Viragos included.

Should all attempts fail then I have found these plans detailing how to construct a time machine, Looks an easy build. What can possibly go wrong. We (The Falling Down Cider Appreciation Society)  travel back to the 1980's and do the long hot summer of love crap all over again......I suggest preparations start immediately to source parts. It could be a good laugh.


Not chinese parts mind !!!! We will never break free of the earths gravitational pull with gears made from re-cycled T.V.s, micro-waves and washing machines. No ! These need to be proper Indian Royal Enfield gears !!!!!!

In the meantime I thought a few hours on Lovely Maroon would be a good way to spend a quiet Sunday afternoon... so I made myself a couple of 3/8"BSP to 1/4"BSP adapters for the fuel taps I had purchases a couple of months ago and then whilst in the mood made a pair of Old Skool type fuel filters from sheet brass gauze.

Smart as 'owt !!!!  Thanks to Big Bertha and Ye Olde Copper Iron...
We like soldering down in The Old Sidevalve Bar'......It's hot and smokey, with an odd splash of flux.
Proper men's work !!!!!!!!

Posh !!!!!!!!!!!!!!!! 
Flagon !!!!!!!!!!!!!!!!!!!!!! 
Ale !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Now !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!



Monday, 30 September 2013

Working on the 12"er...







Keanu Cracklecrispy here....Greetings! Your journey through the wilderness of Viragoshishkabab is over  Yes , the Holy Grail of Vintafake has led you to a kasbah that offers protection against electronic technology...You are now safe my friend....for this is 'The Old Sidevalve Bar'
Where motorsickles are created by old wise folk who can still co-ordinate hand and eye........and gain satisfaction from hard toil.........

So it was that your Uncle Alb has been pretty damn busy.....working on his 12"er down in the man cave. A foot wide monster that will both astonish and delight once mounted on the VBobber.
First I cut a steel plate to fill the underside and with careful whizzy whizz with the grinder made it a fit to win any perfect fit prize. Then the front fillet was cut and shaped....

It was at this point that I realised that I could fit the front and back sections before the underside and achieve
an almost weld free top....Fully skilled 12" manufacturers will probably know that already but hey.....this is manufacturing in it's rawest state.....solving the engineering problems and creating more....
reactional and counter reactional.. Cut and thrust all in a 6ft x 4ft shed....
So....let's fit the front...because I can
And finally just to test my thought of sealing the weld with solder I did one side. I wanted the tank to look like it was created with solder joints and I had previously thoroughly cleaned the joining area...Hum, Not clean enough.....A bit of a fight ensued with a variety of fluxes, various solders, a large copper headed soldering iron and of course Big Bertha (the residential blowlamp)......
Did manage to get the desired result in the end...
Posh ! Mi throats burning with the flux fumes.....I need a long slow gargle.

Fill mi flagon with buttercup syrup.  

Thursday, 26 September 2013

This is Captain Interseptor calling.....are you receiving ?
Captain Interseptor calling the world........Do you hear me ?
This is Captain Interseptor calling the Virago freedom bloggers........
MAYDAY......MAYDAY.....
Ssshhhh ! It's really me ! Keanu Cracklitus ! I'm transmitting a mayday message from the garden for I fear the worst........
Further to my blog entry regarding the free G4 filter it has come to my knowledge that the Blighty government have actioned eavesdropping on Belgium transmissions.........Hey ! I transmit to Belgium !
Check out this link 'Operation Socalist'   The weasels in the listening station on the Yorkshireshireshire moors could well have turned the antenna towards The Old Sidevalve Bar ???? maybe....? by mistake ? Nah !?!


What if the G4 filter is a secret spying device......what if its also records video....what if it's recording my every move ???? eeeek !
POSH ! TURN OFF THE LIGHT ! I DON'T WANT THE GOVERNMENT WATCHING MY FLAGON LIFTING.......It's a private thing.......

I'm telling you all now....Before you know it there will be a tax on G4......

Posh ! I can't feel mi beer.....it's bloody dark in here......

Wednesday, 18 September 2013

The BSA B31 that time forgot. Part 10

It must be tastic-tank week !
Keanose Crackleportie here-  In a bid to achieve as much as possible before the G4 radiation effects from the (secretly built) local transmission mast take hold of me entirely I am posting a couple of pictures of 'Lovely Maroons' fuel holding vessel. Now wearing it's pin strips with pride.
Blimey peeps ! The gold paint took some finding......only time will tell if the choice was a good one but I decided on an ebay special brake caliper paint that claims to be oil, petrol, heat....and all that similar stuff resistant.






Posh ! It's well past the beering hour.........Pass mi flagon.......